Fall arrester

A fall arrester accompanies the user upward freely on a wire cable or polyamide rope and blocks in case of a fall. A suitable fall arrester must run along without affecting the user.

The rope and the corresponding fall arrester form a unit and are certifi ed together. Incompatible runners and ropes are a great risk. In the area of cableway masts, telecommunication and electrical masks, fall arresters allow permanent fall protection for ladders, ascents and descents.


IMMOOS fall arrester “Fallbloc 2”

1.08.007

The Fallbloc is a simple and easy-to-usedevice, which is compatible with the IMMOOS climbing protection system. Area of use: On the IMMOOS Fallblocclimbing protection system. On vertical,straight and/or curved stretches. Unlimitedmounting confi guration on all bearingstructures.

• For use on different wire cables (seefollowing list).

• Problem-free hooking and unhooking atevery location desired.

• The restraint force occurring in the fallis absorbed by opening the fall energyabsorber.

 

Cables to be used:

Cable 1: Material INOX 1.4401(AISI 316); 8 mm

Design: 6x19+SE

Cable 2: Material galvanised;8 mm

Design: 6x19 Seale+PP

Weight: 840 g

Standard: EN 353-1

Restraint device “Stop and Go”

I70812PO

Restraint device for fl exible rope guiding.

• Blocks in case of uncontrolled slipping

• The anti-panic lever permits self-abseiling for short distances or in emergency situations

 

Ropes: Certified with kernmantel

rope 12 mm

Weight: 480 g

Standard: EN 353-2

Restraint device ASAP LOCK

B71ALU

Mobile fall arrester with locking function

• Constant fall protection

• Arrests falls, slides, and uncontrolled descents

• Locks on the rope even if grabbed during the fall

 

Ropes: Semi-static ropes 10-13 mm Ø (EN 1891 type A)

Weight: 425 g

Standard: EN 353-2



Energy absorber ASAP‘Sorber

L71AA

Energy absorber with integrated connection equipment for the ASAP restraint device.

• Connects the accompanying “ASAP” restraint device to a harness

 

Length / Art. no.:

20 cm / L71AA 20

40 cm / L71AA 40

Standard: EN 355

Height safety device NANO-LOK EDGE

3101437

The unique technology NANO-LOK EDGE makes the device safe even for edges as sharp as 0.50mm radius.

• Dedicated foot level tie-off

• Easy-fit connector

• Impact-resistant housing

• Multiple hook options

 

Weight: 1.14 kg

Length: web 2.3 m

Standard: EN 360

Height safety device “Compact”

HSG-001-2.5

Height safety device for securing People working at heights.

• Pull-out belt

• Blocks in case of an uncontrolled fall

• Integrated energy absorber

 

Weight: 1 kg

Length: 2.5 m

Standard: EN 360



Height safety deviceBlocfor 2W

75389

Height safety device for securing people working at heights.

- simple service, annually inspection can be done through a qualified person (the device must not be returned yearly)

- Pull-out belt

- Blocks in case of an uncontrolled fall

- Integrated energy absorber

 

Weight: 0.9 kg

Length: 2 m

Standard: EN 360

Height safety device Blocfor AES

586xx

The height safety device with automatic rewind is equipped with the new AES-System (Absorbing End System).

- simple service, annually inspection can be done through a qualified person (the device must not be returned yearly)

- Available with galvanized wire (58612), high-grade steel rope (58622) and synthetic fibre (58632)

 

Length: 10 m

Standard: EN 360

Height safety deviceBlocfor ESD

70xxx

Compact height safety device with belt and energy absorber.

- simple service, annually inspection can be done through a qualified person (the device must not be returned yearly)

 

Available in different lengths:

1,8 m (70592) belt-width 18 mm

5 m (70652) belt-width 25 mm

6 m (70662) belt-width 25 mm

Standard: EN 360